Scrivora Engraving Pen Kit
Turn anything in the house into a gift with their name on it.
- ✓Readable names on steel or glass, first try
- ✓Engraves metal, glass, wood, stone, leather, plastic
- ✓Battery and speed shown right on the screen
- ✓Lighter than a golf ball, steady in any hand
Will it actually hold up, or quit after two projects?
That fear sits behind every mixed review in this category, and it is why Scrivora is built the way it is. The body is an aluminum tube, not a plastic shell, and the tip holds any standard 2.35 mm (3/32 in) bit dead center. Inside sits a 3-speed motor from 6,000 to 20,000 rpm and a 350 mAh lithium cell that charges over Type-C. The screen shows the charge as a percentage and the speed as a number, so you know where you stand before you start. If anything is not right, you have 30 days to send it back for a full refund.
What would they even engrave with it?
Start with what is already in the house. The stainless tumbler on the counter, the wine glasses, the cutting board, the kids’ water bottles, the ornaments in the box in the garage. Then the things that walk off: sockets, pliers, a pocket knife, the dog’s tag. A name, a date, initials, a short line. The first project usually happens the evening the box arrives, and the second is whatever someone asks for once they have seen the first. Metal, glass, wood, stone, leather and plastic all take the diamond bits, so nothing on the list is off limits.
I can’t draw. Will my first name still look good?
You never draw freehand. Print the name in any font you like, tape it to the surface, and trace the letters with the pen at the low speed step. The bit follows the printed line, so the letters come out the way they look on paper. The pen weighs less than a golf ball and holds like a pencil, which keeps your hand steady across a whole word. Practice on a jar or a scrap of wood first with one of the 30 bits, then do the real piece. Most people get a clean, readable name on their first evening.
Why get two kits instead of one?
Because there are usually two people on the list who would love this, and one of them is you. The 2-kit bundle is $89.99, which works out to $45.00 a kit and saves $70 against MSRP. One for them, one for you, and you can make gifts side by side instead of waiting your turn. The 3-kit bundle covers the whole list at $43.33 each and saves $110. Every kit ships with its own 30 diamond bits, case and cable, in one box and one tracked shipment, and every kit carries the same 30-day money-back guarantee.
THE PROBLEM
Personalized Gifts Get Kept. Generic Ones Don't.
A tumbler with her name on it gets used every single day. The same tumbler without one ends up at the back of a cabinet by February.
Having a shop do it costs ten to twenty dollars an item, takes a week, and only works on the things they happen to sell.
Scrivora puts the name on it tonight, at your own kitchen table, in one sitting.
Names on tumblers, glasses, boards, ornaments, tools
No shop fee and no week of waiting
Trace a printed name, no drawing needed
Two kits save $70, three save $110
Made at Home, on the First Try
Tumblers, glasses, boards, rocks, tags and tools, engraved at kitchen tables by people who had never held an engraving pen before.
THE MECHANISM
What Keeps the Line Steady
A clean name comes down to three things. A bit that spins true, a speed you can actually see, and a pen light enough to hold like a pencil.
1. TrueAxis Micro-Drive The bit locks dead center in the tip, so it spins true instead of wandering. The line goes exactly where your hand goes, letter after letter.
2. Three Speeds, Shown On Screen Low for plastic and leather, middle for glass and wood, high for steel and stone. The number on the screen tells you which step you are on.
3. A Battery Percentage, Not a Guess The screen shows the exact charge before you start, so a name never stops halfway through. It charges from the same cable as your phone, in any room.
The result: letters that read like a jeweler cut them, made at your own kitchen table.
What Customers Are Making
4.7/5
Based on 24 reviews
THE PROOF
A Readable Name on the First Tumbler
In our first-evening trial, a first-time user taped a printed name to a stainless tumbler and traced it in one pass.
No shop fee. No freehand. No guessing the battery.
*Results from our in-house first-use trial on a printed, taped name. Finish varies with surface, bit and pressure. Practice on a jar first.
Surfaces tested: stainless steel, glass, oak, river stone
Bits in the box: 30 diamond-coated, in a case
Charge readout: exact percentage on the pen's screen
BUILT TO LAST
Built to Outlast the Bargain Pens
Bargain engraving pens are a plastic shell, a small motor and a battery you cannot see. They spin for a project or two, then stop taking a charge, and their odd-size bits fit nothing else you can buy.
Scrivora is a solid aluminum body with a real charge readout and standard bits you can buy anywhere.
Aluminum tube, not a plastic shell
Charge shown as a number, not a blink
Standard-size bits, refills anywhere
FOR EVERYONE ON THE LIST
One Pen for Everyone on the List
Whoever you are buying for, the first project is already sitting in their house, and the second one is whatever a friend asks for after seeing the first.
For the Kitchen: Tumblers, wine glasses, cutting boards and pantry jars, each with a name or a date that survives the dishwasher for years.
For the Garage: Sockets, pliers, drill batteries and a pocket knife, marked with initials so they stop walking off the job.
For the Kids: Water bottles, phone cases, ornaments and the rocks they bring home from the yard, each one with their name on it.
Frequently Asked Questions
Everything you need to know about the Scrivora Engraving Pen Kit.
Is it safe for a teenager to use?
Yes, with the same care you would give any small rotary tool. Wear safety glasses, keep hair and sleeves back, and work on a mat. The pen is light, the bit is small and the speed steps start low, so a teen can learn on a jar or a scrap of wood before touching anything that matters. An adult nearby for the first evening is a good idea.
What exactly comes in the box?
The Scrivora Engraving Pen, 30 diamond-coated bits in their own case, a Type-C charging cable and a quick-start guide. That is everything you need for the first project the evening it arrives. The Complete Set adds five stencil sheets (letters, numbers and motifs) and four practice boards in aluminum, leather, bamboo and acrylic. With the pen kit alone, the quick-start guide shows you how to print any name in any font, tape it on and trace it.
Do the bits fit other brands, and where do I get more?
The pen takes standard 2.35 mm (3/32 in) engraving bits, the size sold everywhere, so you are never locked into one brand. The 30 diamond bits in the box cover metal, glass, wood, stone, leather and plastic and last through a long list of gifts. When you do want a fresh set, the Scrivora 30-bit refill is $19.99 and swaps in the same way.
Will it arrive in time for Christmas?
Yes, if you order by Dec 18. Every order ships within 24 hours with free tracked US shipping, and you get the tracking number by email as soon as it leaves. Two and three-kit bundles ship together in one box, so everyone on your list gets theirs at the same time. If you are cutting it close, order today and the pen is on its way tomorrow.
What if they open it and don't love it?
Then send it back within 30 days of delivery for a full refund, no arguing. Most people never get that far, because the first project happens the evening the box is opened and the second is requested by whoever saw it. But the guarantee is there so you can buy for someone else without guessing. The bundles carry the same 30-day money-back guarantee on every kit.
Can I engrave a signature or someone's handwriting?
Yes, and it is one of the most loved things people make with it. Photocopy or print the handwriting at the size you want, tape it to the surface, and trace the lines at the low speed step. A recipe in Grandma's hand on a cutting board, a child's signature on a keychain, a note on the back of a watch. The pen follows the line, so the handwriting stays theirs.
